CALGARY’S LOCAL TIRE PEOPLE911 48 AVE SE ↗587-899-9870

KMJ TIRE BLOG / OCTOBER 3, 2026

Transporting Loose Tires and Wheels in Calgary

Carry loose tires and wheels in Calgary with a practical plan for vehicle load limits, cargo restraints, lifting, passenger space and the return journey home.

Loose tires and wheel-and-tire assemblies on the floor of the KMJ work area.

Can you carry four tires to a seasonal changeover in your own vehicle? Often, but fitting them through the hatch is only the first question. The load must also stay within the vehicle's limits, be restrained using appropriate equipment and attachment points, and leave the driver and passengers properly accommodated. If any of those conditions cannot be met, arrange a different transport plan before the service visit.

A tire already mounted on a wheel is a substantial piece of cargo. An unmounted tire is lighter, but it can still roll, slide or become a hazard when a vehicle stops suddenly. A plastic tire bag keeps upholstery cleaner; it is not a restraint. A closed hatch keeps the weather out; it does not prove that the load inside is secure.

This guide follows the whole trip: identifying the set in your garage, checking the vehicle, loading and securing it, handing it over, and bringing the outgoing set home. It is about transporting loose items, not choosing which tires to install or teaching a universal tie-down pattern. Your vehicle's manual and the instructions for its cargo equipment decide the details that a general article cannot.

1. Identify exactly what needs to travel

Start beside the tires, not beside an already packed car. Count the items and distinguish loose tires from complete wheel-and-tire assemblies. Four black bags can conceal either, and the difference affects weight, handling and the work required at the destination. A complete assembly has a wheel inside it; an unmounted tire has an open centre and still needs mounting before vehicle installation.

Read the visible markings without assuming all four match. Photograph each tire's size and model and, where practical, the wheel details. A household may have sets for several vehicles, including one that has been sold. Moving the wrong set across Calgary is inconvenient; authorizing its installation because the bags look familiar creates a more serious problem. Identification should happen before transport and remain separate from professional fitment confirmation.

The tire sidewall information guide can help you recognize which markings to record. You do not need to decode every moulded number at home. Clear photographs are often more useful than a confident but incomplete transcription. Keep one overall picture showing the whole group as well as close views of the individual labels.

Also gather anything the service provider has specifically requested, such as a wheel-lock key or the correct separate fastener set. Put small parts in a closed, labelled container rather than dropping them inside a tire. Do not assume that old hardware is suitable for another wheel. The purpose of bringing it is to let the installer assess it, not to pre-approve its use.

2. Confirm the visit before loading the car

Tell the provider what you actually have: four loose tires, four mounted assemblies, or another combination. Explain whether the set is already yours and whether there are known concerns such as an air loss or damaged wheel. That information affects the scope of the visit. A seasonal swap between complete sets is not the same task as removing tires from wheels and mounting different tires.

Review the seasonal tire changeover service information while clarifying the work. Confirm which vehicle is receiving the tires and whether the vehicle itself must be present. Do not transport only the loose set when the agreed service requires the car, and do not assume a drop-off-only arrangement has been accepted just because it seems convenient.

Ask where to stop for unloading and whether assistance is available. A tight driveway, underground parkade or busy commercial frontage may require a different handover arrangement. Confirm access rather than blocking a travel lane while you figure it out. If the site has an agreed unloading procedure, follow it on arrival instead of interpreting an open door as permission to enter a work area.

Think about the return leg now. After a changeover, another set usually needs to come home unless you have separately agreed otherwise. The outgoing set may have different dimensions or may be wet and dirty. Keep the same cargo capacity available for the journey back. Combining the visit with a large purchase or collecting additional passengers can invalidate the plan you made for the outward trip.

3. Use the actual vehicle's loading instructions

Find the owner's manual section on carrying cargo or loading the vehicle. Check the labels and limitations for the particular vehicle, not a similar model shown in a video. Trim, equipment, seat configuration and accessories can change the usable load allowance. A large-looking cargo area is not a promise that everything placed in it is acceptable.

The load-index explanation addresses tire capacity, but that is only one boundary. Fitting tires with a higher load rating does not increase the vehicle manufacturer's allowable loaded weight. Cargo floor limits, axle limits, roof limits and tie-down ratings may impose additional restrictions. Satisfying one number does not cancel the others.

Read any instructions for folding or removing seats. Some vehicles require a particular sequence, secure storage of removed components, or confirmation that a seatback has latched again. A seatback that appears upright may not be locked. Equally, a folded seat does not automatically create an approved platform for heavy cargo. Use the configuration the manufacturer permits and check whether cargo can move into occupied space.

If you cannot identify the relevant limits or attachment points, get model-specific guidance before carrying the set. The missing information is not solved by driving slowly. A vehicle can require a sudden stop close to home, and a loading method should not depend on having an uneventful journey. The useful question is whether you can support the arrangement with the correct instructions, not whether someone once carried a similar load successfully.

4. Do the payload arithmetic with real weights

Passengers and cargo share the available load allowance. Include the driver, anyone else travelling, the tires or assemblies, tools, bags and other items. Account for accessories as directed by the vehicle manufacturer. Avoid treating a published maximum for a model range as the allowance for your specific vehicle; start with its own labels and loading procedure.

Here is a deliberately hypothetical worksheet. Suppose a vehicle label and manual establish an occupants-and-cargo allowance of 400 kilograms for the relevant configuration. Two occupants total 150 kilograms, four assemblies have a measured total of 100 kilograms, and other carried items total 30 kilograms. The arithmetic leaves 120 kilograms against that one allowance. Those invented figures illustrate subtraction; they are not typical tire weights or a loading recommendation.

That remaining number does not certify the load. You still need to respect axle distribution, cargo floor restrictions, seating requirements and restraint instructions. A single heavy item placed badly can create a problem even when the total looks acceptable. If the vehicle is close to a limit, have the weight and distribution established appropriately rather than relying on a bathroom-scale estimate and rounded passenger weights.

Do not guess that steel wheels must weigh a particular amount or that all assemblies of one diameter are comparable. Tires and wheels vary considerably. Use reliable product information for the exact components or an appropriate weighing method. Avoid unsafe lifting merely to obtain a number. When measuring is impractical, choosing another transport arrangement may be simpler than trying to prove that a marginal load will fit within the allowance.

5. Measure the opening as well as the space inside

A cargo compartment can be wide enough while its opening is too narrow for the intended arrangement. Measure the opening, the usable floor and the height available with the hatch or lid closed. Account for wheel diameter, tire width, protective covers and the space needed to attach restraints. Keep hands clear of pinch points while checking clearances.

Sketch the arrangement before lifting anything. Mark the approved attachment points, occupied seats and any areas the manual says must remain clear. The drawing need not be sophisticated. It should answer practical questions: can you reach the anchor after the first assembly is loaded, can the restraint follow its intended path, and can the hatch shut normally without pressing on the load?

Do not use the power hatch motor to compress tires into a space that is too small. Stop if closing requires force or if an object contacts the glass, latch or trim. Carrying the set with an improvised partly open hatch is not the next step in this plan. Choose a vehicle or service arrangement that can accommodate it correctly.

A rehearsal with one item can reveal a problem before you lift the other three. Keep the vehicle stationary during the trial and do not treat a successful fit as permission to drive with that item loose. If the layout works only by pushing the driver's seat too far forward, placing cargo near controls or blocking required visibility, it does not work. Comfort, control access and safe driving position remain essential.

6. Keep passengers out of the cargo problem

Plan the passenger count before deciding to fold seats. Every passenger needs a suitable seating position with the required restraint, and child seats need their correctly installed configuration. Tires should not crowd a child restraint, interfere with a belt or occupy space needed for an airbag. Do not create a cargo arrangement that requires someone to hold an assembly on their lap.

Separating the tire trip from school pickup or a family outing is often the cleanest solution. It removes competing space requirements and makes unloading less hurried. If another adult comes to help with lifting, include that person's weight and seat in the plan from the beginning. An extra helper cannot simply be added after the cargo area has been packed.

A rear seat belt is not a universal cargo tie-down. Nor should child-seat anchors, head-restraint posts, seat rails or decorative hooks be assumed suitable because a strap can pass around them. Use only points and methods approved for the relevant cargo purpose. An item that feels tight when parked can still have an unsafe restraint path or unsuitable anchorage.

Pets need their own appropriate transport arrangement, away from the tire load. A pet climbing between assemblies can interfere with both containment and driving, while an unsecured carrier creates another cargo issue. If carrying passengers or animals makes proper separation impossible, make different arrangements for one of the journeys. The appointment is easier to reorganize than the interior safety systems of a vehicle.

7. Protect the interior without confusing covers with restraints

Clean loose dirt from the exterior of the items before loading, using a method suitable for the tire and wheel finish. Let wet surfaces drain where practical. A bag or cover can help contain grime, and a protective liner can protect upholstery, but neither establishes cargo security. Choose protection that does not hide damaged straps, cover attachment points or interfere with a latch.

Avoid slippery layers that make the load less stable. A stack resting on several loose plastic sheets can behave differently from one placed on the vehicle's approved cargo surface. Do not add improvised padding under a restraint in a way that allows it to settle and become slack. Follow the cargo-equipment instructions for surface protection and any edge protection they require.

Keep the wheel face, valve and other vulnerable areas away from hard contact where possible. Padding should protect finishes without becoming the structure that holds everything in place. Do not thread a restraint through a component merely because the hole is convenient. Wheel spokes, valves and trim are not interchangeable with rated cargo attachments, and careless routing can damage a usable assembly.

The practical tire-care information is useful for the broader care routine, but transport preparation has its own goal: arrive with the same items in the same condition and without loose dirt spreading through the cabin. A clean bag helps with that goal. It does not turn an unrestrained wheel into safe luggage, and its handles should not be assumed capable of lifting the enclosed weight.

8. Choose restraint equipment before the loading day

Read the vehicle and restraint manufacturers' instructions together. The equipment must suit the load, the available anchor points and the intended direction of restraint. A rated strap does not make an unrated attachment strong, and several weak hooks do not become an approved system merely because they are used together. Do not select equipment solely by colour, width or how substantial the buckle looks.

Inspect straps, hooks and tensioning mechanisms before use. Damage, missing identification or an uncertain history is a reason to obtain suitable equipment, not to compensate with another knot. Follow the manufacturer's retirement and inspection criteria. A luggage elastic or improvised rope arrangement should not be substituted for the restraint method required by the vehicle and cargo equipment instructions.

Ford's published tie-down guidance offers a useful model-specific example: fixtures have defined ratings and installation requirements. The important lesson is to look up your own vehicle's system. Numbers given for one Ford fixture cannot be transferred to an SUV's grocery hook or another manufacturer's cargo rail. The anchor, fastening method and restraint all need to be appropriate together.

There is no universal strap count or tension setting in this guide. The correct arrangement depends on the items, their orientation, the vehicle and the equipment. If you cannot determine an approved way to restrain the load against movement, do not improvise a diagram from a photograph online. Ask an appropriately knowledgeable provider or use a transport option with suitable equipment and a clear loading procedure.

9. Make lifting a separate decision from carrying capacity

A vehicle may be capable of carrying the set even when an individual cannot safely lift it. Plan for the weight, awkward shape, height of the cargo floor and route from storage. Wet floors, snow, stairs and poor lighting make handling harder. Clear the route first and obtain suitable assistance or equipment before starting.

Do not use a tire bag's handles as lifting equipment unless the product is specifically intended and rated for that load. Do not put fingers where they can be trapped between a wheel and the sill. If an item starts to slip, do not try to catch a heavy assembly in a way that risks injury. Keep children and other bystanders away from the loading area.

A hand truck or trolley may help on suitable level surfaces, but it still needs to be appropriate for the weight and controlled according to its instructions. A device that works in a garage may not be suitable for a stairwell or icy ramp. Secure items on the handling equipment as required rather than balancing a tall stack and hoping it stays upright.

If home handling is the main difficulty, ask about mobile tire service in Calgary and whether the particular task and location are suitable. That is an inquiry, not a promise that every driveway, parkade or job can be accommodated. Confirm the working space, access, scope and timing. Avoid moving the problem outside merely to discover that the planned work cannot be carried out there.

10. Load low and follow the approved arrangement

Use the cargo layout permitted by the vehicle manufacturer and the restraint plan you have established. In general, avoid unnecessarily high stacks and concentrated loads on areas not designed for them. Place items carefully rather than dropping them onto the floor or folded seating. Keep access to the required anchors and do not bury the restraint hardware beneath the first assembly.

An upright tire can roll; a flat assembly can slide. Choosing one orientation does not eliminate the need for restraint. The suitable orientation depends on the space, support and approved securing method. A row wedged tightly between trim panels is not automatically secured, and soft upholstery should not be treated as a structural stop.

Protect the vehicle's installed spare-tire access where the manual requires it, and keep necessary emergency equipment accessible without dismantling an unstable stack at the roadside. Do not relocate a secured spare or jack into an unsecured cabin position simply to gain room. Every item you move to make space needs an appropriate new location and restraint.

Before tightening anything, verify that the arrangement does not interfere with belts, seat latches, ventilation openings or vehicle controls. Apply the restraint according to its instructions and check that hooks are correctly seated. Excess force can damage components; insufficient restraint can permit movement. If the equipment cannot be used correctly in the available space, unload and revise the plan instead of accepting a nearly secure result.

11. A sedan and a hatchback are different loading problems

A sedan's separate trunk can provide separation from the passenger compartment, but it still has load limits and requires appropriate cargo management. A pass-through or folded rear seat changes that separation. Check whether the opening exposes occupants to moving cargo and what the manufacturer requires when it is used. A trunk lid that shuts is not a restraint assessment.

A hatchback, wagon or SUV has an open path between much of its cargo space and the cabin. That makes proper restraint and adherence to stack-height instructions especially important. A removable parcel shelf is not a barrier designed to contain heavy assemblies. Do not balance cargo on it or rely on it to stop a wheel during braking.

Cargo barriers and nets also have different purposes. A small-item convenience net should not be assumed equivalent to a barrier designed and installed for the relevant load. Even an appropriate barrier does not automatically eliminate the need to secure the cargo. Follow the specific system's instructions, including permitted seat positions and attachment points.

For a small vehicle, two properly planned journeys may be preferable to one overloaded or poorly restrained trip, provided the receiving provider agrees and each journey is safe. Splitting the load is not permission to skip securing it. It also requires coordination so that the installer knows which items have arrived and does not proceed on an incomplete or misunderstood set.

12. A pickup bed does not remove the securing job

An open bed has more obvious room, but loose tires can still shift, roll or escape. Use the vehicle's approved bed anchors and suitable restraint equipment. A closed tailgate, bed cover or canopy is not a substitute for securing the cargo. Confirm any limits and instructions for the bed, anchor system and added accessories.

Keep the load distribution within the manufacturer's requirements. Do not concentrate the whole set in a position chosen only because it is easy to reach from the tailgate. Account for other work equipment already carried in the truck. A bed full of tools and materials may use much of the available payload before the tires arrive.

Check that the arrangement does not obscure lights, the plate or visibility required for driving, and that nothing can project or escape improperly. This article is not a substitute for applicable load-securement requirements. If you are using a commercial vehicle or trailer, obtain the guidance specific to that operation rather than assuming a personal-car example applies.

The commercial tire services overview may be relevant when the items belong to a work vehicle, but transport and installation scope still need confirmation. Do not assume a heavy commercial assembly can be handled like a passenger-car wheel. Describe the equipment accurately and arrange appropriate handling before anyone attempts to lift or carry it.

13. Check the tires supporting the loaded vehicle

The loose set is cargo. The tires already installed on the vehicle are doing the carrying, and their condition and inflation still matter. Check them according to the vehicle manufacturer's cold-pressure instructions. Do not inflate them to the sidewall maximum simply because you are adding cargo. If the manual specifies a different setting for a particular load condition, follow that specific instruction.

Transport Canada's Riding on Air guidance distinguishes the recommended vehicle pressure from the maximum information on the tire. It also advises against overloading and warns that a tire can be underinflated without looking obviously flat. A walk around the vehicle is useful, but it does not replace a pressure measurement with an appropriate gauge.

For Calgary's seasonal trips, remember that changing temperatures make a regular cold-pressure routine important. The winter tire information for Calgary can support seasonal planning, but carrying your winter set in the trunk does not give the installed tires winter capability. The journey to the changeover still happens on the tires currently touching the road.

If an installed tire has an unresolved pressure loss, visible damage or another concern affecting safe travel, deal with that before the loaded journey. Ask about tire repair assessment in Calgary where appropriate, without assuming every damaged tire is repairable. Do not add weight and hope that a short route makes an existing problem unimportant.

14. Label the set so the handover remains clear

Use labels that identify the vehicle, owner and set without exposing unnecessary personal information. A simple set name and the relevant vehicle details may be enough for a household; the service provider can specify what it needs. Keep your phone number or full address off exterior labels unless there is a reason to include it and you are comfortable doing so.

If previous wheel positions are recorded, present them as history rather than installation instructions. Directional tread, staggered sizing and other fitment details can affect placement. A label reading left front from last season does not tell the installer to put it there again. Describe known information accurately and allow the professional assessment to determine the correct arrangement.

Keep a separate note about concerns. For example: one assembly lost pressure during storage, one wheel has a visible scrape, or the fastener container came from a different vehicle. State what you observed and when. Do not convert a symptom into a diagnosis or remove a label that might help trace the concern.

If replacement becomes necessary, buying tires in Calgary is a starting point for the selection conversation. Bringing a set for assessment does not commit you to buying another one. Ask for findings and options based on verified fitment, condition and use, with pricing and availability confirmed separately rather than inferred from a general educational page.

15. Run a parked departure check

With loading complete and the vehicle safely stationary, check the whole arrangement before getting into traffic. Verify that restraints are used as instructed, attachment points are correct and the cargo cannot move in the ways the restraint system is intended to prevent. A simple hand check is useful for finding obvious looseness, but it is not proof of crash performance or a substitute for an approved method.

Check that the hatch, trunk and doors latch normally. Confirm seatbacks and any moved seating components are secured. Sit in the driver's normal position and check visibility, mirrors, controls and the path around the pedals. No bag, tool or small container should be able to migrate into the driver's footwell.

Confirm the destination and arrival instructions before leaving. Keep the phone and paperwork accessible without reaching into the load while driving. If a second person is helping, agree that loading questions are settled while parked. Nobody should reach behind a seat to tighten a strap or reposition a wheel on a moving vehicle.

A final count prevents surprisingly common omissions: all intended tires or assemblies, any requested key, the labelled hardware container and the necessary vehicle information. Leave unrelated heavy items at home where practical. The purpose of this check is to make the journey predictable, not to add more equipment just in case until the original payload calculation no longer describes the vehicle.

16. Treat movement or unusual behaviour as a reason to stop

Drive with appropriate speed and space for the conditions and the loaded vehicle. Smooth inputs are useful, but they are not a substitute for restraint. Do not plan to keep unsecured tires still by accelerating gently or avoiding particular roads. Public traffic can create a need to brake or steer that you did not anticipate.

If you hear cargo move, notice an unusual handling change or receive a warning, find a safe place to stop and assess the situation. Do not reach for the load while driving. Avoid opening a hatch directly into a path where an item may fall or roll. If the arrangement has shifted, restore a genuinely suitable method before continuing or arrange help.

Unusual vibration should not be diagnosed from the driver's seat as a balancing issue just because the trip involves tires. Cargo, installed tires and other vehicle systems can produce different symptoms. The wheel-balancing service explanation describes tire-related work, but mechanical concerns need an appropriate specialist. KMJ's scope is tires and oil changes, not general mechanical diagnosis or repair.

Follow the restraint manufacturer's guidance on checking the load during travel, including any recheck after settling. Choose a safe stopping place rather than standing beside fast traffic to adjust equipment. A problem that cannot be corrected safely at that location may require assistance or a different transport method. Preserving an appointment time is less important than resolving an insecure load.

17. Unload in an order that keeps the remaining items stable

Park where directed and agree who will handle the items. Open the cargo area cautiously, especially if there was any indication of movement. Before releasing a restraint, consider what it is holding and whether another item is leaning on the one you intend to remove. A secure stack can become unstable as soon as its first restraint is removed.

Remove small containers and paperwork in an organized way so that they do not get left on the roof or mixed with another customer's items. Keep the wheel-lock key associated with the correct vehicle. Tell the recipient which labels show previous positions and which labels identify a concern. A brief explanation is more useful than assuming the bag markings are self-explanatory.

Compare the handover count with your departure count. Where appropriate, photograph the received group without including other customers or private information. Record any existing damage relevant to the work in a straightforward way. Documentation should clarify the handover, not make unsupported claims about when a scratch or pressure loss occurred.

If you need to arrange the visit, use the online tire-service booking information and confirm the exact service details. An educational guide does not reserve a time or guarantee unloading assistance. Agree the practical arrangements directly, including when the outgoing set will be available and whether you need to remain nearby with the vehicle.

18. Rebuild the return load from scratch

After the service, do not assume the removed set can be thrown into the arrangement used on arrival. Check the number of items, whether they are mounted or unmounted, and their condition and dimensions. A different wheel design or tire width can change how the group sits. Wet outgoing tires also change the cleanliness problem and may make handling less comfortable.

Keep all necessary seating and cargo space free while you wait. If you planned a second errand, make sure it has not added passengers or purchases beyond the original allowance. The return journey deserves the same attention as the outward journey, even if you are tired or the weather has changed.

Clarify what the removed set needs before its next use. It might be suitable for storage, require further assessment or be ready for retirement. Do not infer remaining serviceability merely because it was returned to you. For future seasonal decisions, the all-season tire guidance and all-weather tire guidance explain categories; neither certifies the condition of the particular set in your vehicle.

At home, unload promptly into an appropriate area and follow the tire and wheel manufacturers' storage guidance. Keep the labels and findings with the set. Do not leave it unsecured in the vehicle for the next week's routine trips. Transport is a temporary task with a defined start and finish, not a new permanent storage arrangement behind the rear seats.

19. Three practical examples with different outcomes

Consider a compact hatchback owner travelling alone with four assemblies. The floor space looks sufficient, but the owner cannot identify approved restraint points for the intended layout. The right outcome is not to rely on the folded rear seats and tight fit. The owner obtains model-specific guidance or changes the transport plan. Having enough room answers only the dimensional question.

Now consider a family SUV whose driver intends to collect children after the service. The outward cargo arrangement uses folded seats that the children will need later. Rather than attempting to place tires around occupied seating, the driver separates the errands and unloads the returned set first. This example is about preserving the seating configuration, not about assuming every SUV can carry four assemblies safely.

Finally, imagine a pickup already carrying work materials. Its bed has approved anchors, but the driver's weight worksheet shows that the added tire set would exceed a relevant allowance. Better straps do not solve the weight problem. The driver removes other cargo or arranges another suitable vehicle, then checks distribution and restraint again for the revised load.

These are hypothetical situations, not customer stories. Their different outcomes show why a single loading photograph cannot serve every driver. If your broader tire purchase is still undecided, comparing budget and premium tires can help frame the product discussion. Keep that decision separate from the logistics: an expensive assembly needs the same careful transport reasoning as an inexpensive one.

20. Alternatives when your own vehicle is unsuitable

A suitable borrowed vehicle can be an option, but borrowing the keys does not transfer an understanding of its cargo system. Read that vehicle's instructions, identify its limits and obtain the required equipment. Include the owner in the plan if seats or accessories need to be moved. Do not assume the method used in your own car applies unchanged.

A professional transport provider may be appropriate for heavy or awkward sets. Explain the number, dimensions, mounted status and pickup access accurately. Confirm that the provider accepts those items and will handle and restrain them appropriately. Ask about responsibility for loading and unloading rather than discovering at the curb that neither party has suitable handling equipment.

For service closer to the tires, review the KMJ service-area information and confirm availability and suitability directly. Location coverage does not mean every site is a usable working area. Access restrictions, surface conditions and the specific work matter. Never promise a neighbour that a mobile visit is arranged merely because their address falls inside a general area shown online.

If you are purchasing a new set, ask whether the delivery and installation arrangement can avoid an unnecessary extra journey. The tire brands available through KMJ's selection pages can support that conversation, but brand listings are not live stock promises. Verify the exact product and logistics together so that convenience does not become a reason to accept an unsuitable size or specification.

21. Keep a short transport card for next season

Save a practical record of what worked: vehicle used, manual section consulted, cargo configuration, suitable equipment and any access instructions from the destination. Record the exact set identity, not just winter tires. Include problems encountered, such as a hatch opening that required a different orientation or a need for a second person during unloading.

Do not turn last season's record into automatic approval. Recheck it when the vehicle, tires, wheels, passengers or equipment change. Inspect restraints each time and confirm that relevant instructions still apply. A new cargo liner, replacement wheel or additional passenger can alter the arrangement enough that an old photograph no longer describes the current task.

Keep sensitive details out of a card that travels with the tires. You may want the full invoice in your private records while placing only the vehicle and set identifier on the bag. Preserve any professional findings about condition alongside the record so that the next changeover begins with useful information rather than a vague memory that everything was probably fine.

The bottom line is simple: identify the load, establish the vehicle's limits, use an approved securing method and plan both directions of travel. If one of those pieces is missing, change the transport arrangement before leaving. Four tires arriving together is convenient; four tires arriving correctly identified, undamaged and without endangering the occupants is the actual goal.

KEEP READING

More from
the KMJ blog.

All posts ↗

Forklift Tires in Calgary: Cushion, Pneumatic or Solid?

How Calgary warehouses and yards can choose cushion, pneumatic or solid forklift tires, read wear, check pressure and know when tire work needs a pro.

Read the guide ↗

Box Truck Tires in Calgary: Sizes, Duals and Real Loads

How Calgary box truck and cube van owners can read commercial tire sizes, set pressure for real axle loads, keep dual tires matched and replace them safely.

Read the guide ↗

Wheel Loader Tires in Calgary: Snow Lots to Gravel Yards

How to read wheel loader tire codes, pick tread for snow or gravel, set front and rear pressure by load, and judge cuts on a loader working Calgary yards.

Read the guide ↗

YOUR NEXT MOVE

Let’s get you
road ready.

Shop tires Call KMJ
Call KMJShop tires ↗Book service ↗